HFBoards

HFBoards (http://hfboards.hockeysfuture.com/index.php)
-   The Rink (http://hfboards.hockeysfuture.com/forumdisplay.php?f=150)
-   -   Can't get screw out of visor hardware (http://hfboards.hockeysfuture.com/showthread.php?t=419852)

Senor Rational 09-17-2007 03:48 PM

Can't get screw out of visor hardware
 
I have an oakley on a Bauer helmet with the oakley hardware and for the love of life I cant get one of the screws out. Ive tried using needle nosed plyers to hold the back of thescrew and still nothing:help:

stick9 09-17-2007 04:00 PM

Quote:

Originally Posted by Senor Rational (Post 10439523)
I have an oakley on a Bauer helmet with the oakley hardware and for the love of life I cant get one of the screws out. Ive tried using needle nosed plyers to hold the back of thescrew and still nothing:help:

Try spraying some WD-40 on it from the back side and let it sit a bit.

FLYLine24 09-17-2007 04:01 PM

Quote:

Originally Posted by Senor Rational (Post 10439523)
I have an oakley on a Bauer helmet with the oakley hardware and for the love of life I cant get one of the screws out. Ive tried using needle nosed plyers to hold the back of thescrew and still nothing:help:

I had the same problem, all I can say is good luck...it took me a good hour to get 2 of them out (the other 2 came right out easily). Putting them back in will be just as hard BTW.

Patrick Bateman 09-17-2007 06:45 PM

I would just snip them and go to the hardware store and buy some new screws, because I'm impatient like that. ;)


All times are GMT -5. The time now is 03:45 PM.

vBulletin Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
HFBoards.com, A property of CraveOnline, a division of AtomicOnline LLC ©2009 CraveOnline Media, LLC. All Rights Reserved.