HFBoards

HFBoards (http://hfboards.hockeysfuture.com/index.php)
-   The Rink (http://hfboards.hockeysfuture.com/forumdisplay.php?f=150)
-   -   goalie equipment question updated!!!!! (http://hfboards.hockeysfuture.com/showthread.php?t=514884)

RANGERS2448 05-07-2008 07:10 PM

goalie equipment question updated!!!!!
 
hello all i am going to be playing roller hockey on a outdoor concrete painted ring maybe some asphalt {but not much} basically just pick up games with friends i am looking at a used set of equipment on ebay but im alittle leary with the price and not seeingthe pads please give me any advice as quick as possible considering the auction ends in 1 day i will give u the link below

http://cgi.ebay.com/ws/eBayISAPI.dll...MEWA:IT&ih=006

or are these pads better to pick up

http://cgi.ebay.com/TPS-Xhale-800-Se...QQcmdZViewItem

TrueGrit 05-07-2008 07:24 PM

these will be fairly heavy, but that may not be the biggest concern for you, now for road hockey i think these would be great, they seem to have a solid shape and are more than enough protection. so aside from a good leg workout these will do a great job

RANGERS2448 05-07-2008 07:30 PM

Quote:

Originally Posted by Starnators Fan (Post 14036728)
these will be fairly heavy, but that may not be the biggest concern for you, now for road hockey i think these would be great, they seem to have a solid shape and are more than enough protection. so aside from a good leg workout these will do a great job

do u recamend any other pads

TrueGrit 05-07-2008 07:37 PM

well a more modern set of pads would be lighter, but this should not be a concern, it wont make a big difference. these are very suitable for what you will be using them for and to get all of that equipment at that price is fairly reasonable

ashleesimpson<3* 05-08-2008 07:29 AM

I'd go with the cheaper of the two, as their both good pads.

MikeD 05-08-2008 05:57 PM

The THT gear for a roller puck is going to HURT. The Chest/Arm is VERY inadequate. The THT pads will be shreded very quickly if you get onto asphalt or concrete if they dont maintain the paint. While franklin claims this leg pad to be for ice hockey, I sure wouldnt take any ice puck in them. The mask would be OK. I have been a heaton wearing goalie for a long long time and I do not recognize the model name/number he gives in his added notes. If its a JR model you may have a stinger issue with adults using a roller puck.

The very least for a CA would be a TOur GTL.

http://cgi.ebay.com/Tour-Roller-Hock...ayphotohosting

better yet....

http://cgi.ebay.com/Goalie-Ice-Hocke...QQcmdZViewItem


The TPS X-hale will stick to the rink surface significantly. IF you look at the inside of the pad you see its full jenpro(syn leather). It has very little slide off ice. You would either want to make and lace on slide plates for this inside edge area or find a pad that has ballistic or defender nylon rather than a syn leather.

As for selecting you pad length for fit, measuring your inseam(groin to floor with no shoes on) use that as the MIN pad size. Add 2-3 inches to that as an absolute max. For example, if 32 inch inseam, pads that will generally fit a MALE goalie will be between a 32 and 34. IF you desire a pad length longer than that select 34 +2 which would be the designation for having added lenth in the thigh rise area. Just going to a 36" pad would put your knee too low in stock pad knee lock or craddle.

RANGERS2448 05-08-2008 08:03 PM

Quote:

Originally Posted by MikeD (Post 14047454)
The THT gear for a roller puck is going to HURT. The Chest/Arm is VERY inadequate. The THT pads will be shreded very quickly if you get onto asphalt or concrete if they dont maintain the paint. While franklin claims this leg pad to be for ice hockey, I sure wouldnt take any ice puck in them. The mask would be OK. I have been a heaton wearing goalie for a long long time and I do not recognize the model name/number he gives in his added notes. If its a JR model you may have a stinger issue with adults using a roller puck.

The very least for a CA would be a TOur GTL.

http://cgi.ebay.com/Tour-Roller-Hock...ayphotohosting

better yet....

http://cgi.ebay.com/Goalie-Ice-Hocke...QQcmdZViewItem


The TPS X-hale will stick to the rink surface significantly. IF you look at the inside of the pad you see its full jenpro(syn leather). It has very little slide off ice. You would either want to make and lace on slide plates for this inside edge area or find a pad that has ballistic or defender nylon rather than a syn leather.

As for selecting you pad length for fit, measuring your inseam(groin to floor with no shoes on) use that as the MIN pad size. Add 2-3 inches to that as an absolute max. For example, if 32 inch inseam, pads that will generally fit a MALE goalie will be between a 32 and 34. IF you desire a pad length longer than that select 34 +2 which would be the designation for having added lenth in the thigh rise area. Just going to a 36" pad would put your knee too low in stock pad knee lock or craddle.


wasnt planning on useing the helmet was going to go with a itech senior ice hockey helmet thanks for the info on the pads do these pads look better

http://cgi.ebay.com/34-Tour-Hydra-Li...QQcmdZViewItem

MikeD 05-09-2008 05:52 PM

nice pad for sport court or well maintained painted surfaces. Wear is still a possibility. You can protect your gloves by putting white tape over the catch bindingsaround the edge of the pocket and on the UNDERSIDE lead edge of your blocker(wear/contact area during paddle down and such)

HEll, you can get brand new tour Evo pads for less

http://www.streethockeyking.com/segolegpa.html

The Franklin SX pro would be an outstanding pad for rec roller street and such. The design is much like the old COMP SHO 4250's they put out for street back around 1995-ish. The only thing missing is the replaceable slide buttons. The drawback is that they still have not included any landing gear. Butterfly would require seperate knee protectors.

The Tour EVO and the STX would work just fine. Abviously the EVO is the better model with hte closed toe design but the STX has the PVC protection on the skate gussets wear area.

RANGERS2448 05-09-2008 11:50 PM

Quote:

Originally Posted by MikeD (Post 14058364)
nice pad for sport court or well maintained painted surfaces. Wear is still a possibility. You can protect your gloves by putting white tape over the catch bindingsaround the edge of the pocket and on the UNDERSIDE lead edge of your blocker(wear/contact area during paddle down and such)

HEll, you can get brand new tour Evo pads for less

http://www.streethockeyking.com/segolegpa.html

The Franklin SX pro would be an outstanding pad for rec roller street and such. The design is much like the old COMP SHO 4250's they put out for street back around 1995-ish. The only thing missing is the replaceable slide buttons. The drawback is that they still have not included any landing gear. Butterfly would require seperate knee protectors.

The Tour EVO and the STX would work just fine. Abviously the EVO is the better model with hte closed toe design but the STX has the PVC protection on the skate gussets wear area.

i was looking at the franklin sx but for the no side protection is why i didnt go with them i really apreciate your help u think the evo or stx is better than the hydra lite

MikeD 05-10-2008 07:45 PM

I wouldnt say better but more suited for what your going to be doing. The tour EVO is a good started pad that will provide a good baseline to start with should you decide to upgrade later to a far superior Miller or other higher end Roller Pad.


All times are GMT -5. The time now is 10:11 AM.

vBulletin Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
HFBoards.com, A property of CraveOnline, a division of AtomicOnline LLC ©2009 CraveOnline Media, LLC. All Rights Reserved.