HFBoards

HFBoards (http://hfboards.hockeysfuture.com/index.php)
-   The Rink (http://hfboards.hockeysfuture.com/forumdisplay.php?f=150)
-   -   Mission Brand quality (http://hfboards.hockeysfuture.com/showthread.php?t=859999)

rbk87 01-02-2011 06:09 PM

Mission Brand quality
 
Just purchased a mission fuel z10 stick... does anyone know of the durability of this brand?

ThorNton Apologist 01-02-2011 06:32 PM

I have all Mission Gloves and Mission pants. But i would not buy Mission Sticks or skates. Unless it was for roller hockey

rbk87 01-02-2011 06:35 PM

Oh it's for ball hockey, is that fine?

doobie604 01-02-2011 06:51 PM

mission sticks are actually pretty good, haven't used the z10 but their ti and v-hex are great sticks. as for ball hockey, any stick would do. you don't really need to use flex to generate hard shots and other than slashes you don't have to worry about blades going soft or stick breaking from blocking a hard shot.

AIREAYE 01-02-2011 06:51 PM

This is very ambiguous, you can't lump quality or lack thereof under a single brand. Each brand produces both poor and exceptional products. The Z10 is an entry-level OPS so it would obviously not perform as well as a top-of- the line stick. Having not heard anything about it, I would assume it's also quite heavy. Looking at the 70:30 carbon to fibreglass ratio, it doesnt seem to be very durable either.

For ball hockey, unless you're getting this thing for free or very cheap, I'd recommend a wood stick, or a stick with an ABS blade

rbk87 01-02-2011 07:45 PM

Does it necessarily have to be 100% carbon to be considered durable?

ThorNton Apologist 01-02-2011 07:48 PM

I dont think you will break it playing ball hockey unless its pretty aggressive/competitive

rbk87 01-02-2011 07:52 PM

well the only thing i can think of that might break it is when I block someone's stick when they are taking a slapshot

O23L 01-02-2011 09:40 PM

I use a Fuel z10 for taking slappers in my garage.

Yeah, It's durable.

AIREAYE 01-03-2011 02:48 PM

Quote:

Originally Posted by rbk87 (Post 29935325)
Does it necessarily have to be 100% carbon to be considered durable?

No, ususally the lower end sticks have more fibreglass than carbon, but a very rough rule of thumb is that lower end sticks with more fibrglass are more durable because of its matireal.


All times are GMT -5. The time now is 01:19 AM.

vBulletin Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
HFBoards.com, A property of CraveOnline, a division of AtomicOnline LLC ©2009 CraveOnline Media, LLC. All Rights Reserved.