HFBoards

Go Back   HFBoards > General Hockey Discussion > The Rink
Mobile Hockey's Future Become a Sponsor Site Rules Support Forum vBookie Page 2
The Rink For the not so ready for prime-time players, coaches, referees, and the people that have to live with them. Discuss experiences in local leagues, coaching tips, equipment, and training.

My shooting / Skill pad experiences with different products / materials

Reply
 
Thread Tools
Old
06-19-2013, 10:32 AM
  #1
Teppo
Registered User
 
Join Date: Mar 2008
Posts: 1,223
vCash: 500
My shooting / Skill pad experiences with different products / materials

I have tried several different types of shooting pads (purchased one, built three). I am in a townhouse community so I need something that I can use in an open space, and carry back to my patio 20 yards away. There is no concrete surface that I can use, but there is a large open grass area (using on grass vs concrete is a big difference). I need a shooting pad for both stick handling, and shooting. Here are the different approaches I have taken - jump to the bottom if you want the quick summary (in chronological order).

1) Roll up plastic $120 (1/10" x 4' x 8.5') http://www.hockeyshot.com/HockeyShot...ng-pad-011.htm

The biggest waste of $120 I have ever spent. The thing does not lay flat (even after weighting it down over night). A real puck barely slides on it. I called the place I bought it from and they flat out told me that it is really meant for a green biscuit - which they sent me free of charge. It slides great on it - but a green biscuit slides great on just about anything. Being that it is a roll up, it is very thin - makes it useless if your only open area is grass.

2) Marker Board $10 (3/16" x 2' x 4') - http://www.homedepot.com/p/3-16-in-x...8#.UcCKnZyZZ8E

This was my first homemade attempt. I was pretty happy with it. Pucks slide really nice on it. Spray a little pledge on it and dry off and it has a real nice "ice-like" feel. It is quite thin, so on grass I needed to glue it to some plywood. After that it was great on grass. After a few weeks it started to warp (I keep it outside, somewhat covered). The surface is fairly durable, but after probably 500 shots or so the glossy layer is starting to scrape off.

3) Harboard Panel $10 (1/8" x 4' x 8') - http://www.lowes.com/pd_16605-46498-...5239&Ntt=panel

The huge size vs low price of this made it appealing. Unfortunately it was a letdown. The pucks really do not slide as well as the marker board from 2). I have heard other talk about spraying something to make it slippery, but I am not really a big fan of the mess that makes. The other thing is that it is not much stronger than cardboard. It it gets wet at all it is done. I guess it would be great to use indoors with a green biscuit to work on stick handling (because it is so huge), but if it is to be used outdoors I can't see how it can last.

4) Melamine Board $10 (1" x 2' x 4') - http://www.homedepot.com/p/1-x-2-x-4...3#.UcHQbPk3vzh

This is finally what I was looking for. The puck slides on this board so well. If you rub some pledge onto it, it is as close to ice as I think you will find. It is 1 inch thick so it does not warp, and it is heavy enough to sit on top of grass. I bought two of these boards and lined them in an 8 foot row. I put a bungie cord at the end of one of them and it is perfect for one timers. I have taken close to 1000 shots with these boards, and no damage at all (other than the edges). I will make a youtube video of this setup soon.


In Summary:

9/10 - Melamine Board: Cheap, durable, excellent slide (especially rubbing pledge into it before starting), thick enough to work on grass.

7/10 - Marker Board: Cheap, good slide. Not very durable, and if using on grass you need plywood under it.

5/10 - Hardboard Panel: Best feature is that it is huge and cheap. Pucks do not slide all that well. It is very thin, and not durable. If it gets wet it is toast.

1/10 - Roll up plastic shooting pad: Very expensive, pucks do not slide well at all, hard to lay flat, too thin to use on grass. Waste of money (in my opinion)


Last edited by Teppo: 06-19-2013 at 10:39 AM.
Teppo is offline   Reply With Quote
Old
06-19-2013, 07:47 PM
  #2
STL Blues Fan
Registered User
 
STL Blues Fan's Avatar
 
Join Date: Jan 2011
Posts: 444
vCash: 50
Cool, thanks man. I'm in the middle of building a little basement setup this week and will go with the melamine board. How did u hook the bungee coard up for one timers?

STL Blues Fan is offline   Reply With Quote
Old
06-19-2013, 09:50 PM
  #3
Teppo
Registered User
 
Join Date: Mar 2008
Posts: 1,223
vCash: 500
Quote:
Originally Posted by STL Blues Fan View Post
Cool, thanks man. I'm in the middle of building a little basement setup this week and will go with the melamine board. How did u hook the bungee coard up for one timers?
I used to 3/8" eyebolts with a bungie cord across. I cut the plastic hooks of the bungie cord and cut the length I needed. I made two loops on each end of the cord by clamping them off with tie straps. Lots of ways to do it. I want to try a thicker band - maybe a bike inner tube. It might be better if the pass is not right on the ground.

Here is video of my son using it. I should have got a 2' x 8' board rather than lining up 2 2' x 4' boards. The gap between the two is hard to get even so the puck slides across both boards.



Last edited by Teppo: 06-19-2013 at 09:55 PM.
Teppo is offline   Reply With Quote
Old
01-24-2014, 09:26 AM
  #4
McDugan
Registered User
 
Join Date: Jun 2010
Posts: 147
vCash: 500
I purchased one of these off of eBay to use as a roll-up shooting mat. Have given it a quick use, and I can recommend it highly.
http://www.ebay.com/itm/140546654617...84.m1436.l2649

Certainly great for the money, much cheaper than the roll-up pads sold on hockey sites, and pretty much identical.

McDugan is offline   Reply With Quote
Old
01-24-2014, 11:44 AM
  #5
goonx
Registered User
 
Join Date: Nov 2010
Posts: 770
vCash: 500
Quote:
Originally Posted by McDugan View Post
I purchased one of these off of eBay to use as a roll-up shooting mat. Have given it a quick use, and I can recommend it highly.
http://www.ebay.com/itm/140546654617...84.m1436.l2649

Certainly great for the money, much cheaper than the roll-up pads sold on hockey sites, and pretty much identical.
There are same stuff hockey side boards are mode from i think

goonx is offline   Reply With Quote
Old
01-24-2014, 12:19 PM
  #6
304
Registered User
 
304's Avatar
 
Join Date: May 2010
Location: San Diego
Country: United States
Posts: 107
vCash: 500
Excellent post! This makes me want to look into a garage setup for my place.

304 is offline   Reply With Quote
Old
01-24-2014, 01:54 PM
  #7
Jarick
Moderator
Doing Nothing
 
Jarick's Avatar
 
Join Date: Jul 2007
Location: St Paul, MN
Country: United States
Posts: 23,634
vCash: 500
Interesting.

I have one of the hard plastic pads that was about $40 or so. It works pretty well. Not as slick as melamine new but probably more durable.

Jarick is offline   Reply With Quote
Reply

Forum Jump


Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:31 AM.

monitoring_string = "e4251c93e2ba248d29da988d93bf5144"
Contact Us - HFBoards - Archive - Privacy Statement - Terms of Use - Advertise - Top - AdChoices

vBulletin Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
HFBoards.com is a property of CraveOnline Media, LLC, an Evolve Media, LLC company. 2014 All Rights Reserved.